Some Tips on Painting Wood Cabinets
This article provides some helpful instructions on how you can add a new coat of paint to worn out storage units to keep them looking like new.
Start by removing the cabinets with a screwdriver. Place the hinges and screws in a plastic bag for easy retrieval once you are done with the project. Then, take off all knobs and pulls and place them in a separate container for safekeeping. If possible, use an electric screwdriver to save on energy when doing this step.
After you taken down the storage units, sand them evenly to remove the previous finish. Remember that paint will not stick to smooth or glossy areas so you need to make sure that all traces of lacquer are removed. Sanding should always be done in the direction of the wood grain to avoid scratches.
Scrub the interior and exterior walls of your cabinets to give them a thorough cleaning using a sponge and some warm water. Once that is done, wipe everything dry before you begin painting on them. You can also use denatured alcohol as an alternative, but you must do so in a well-ventilated area.
Prior to painting, lay the drop cloth in your work area and begin priming your cupboards. Utilise a disposable foam brush for priming the surfaces. Apply about two to three coats of the product you are using, always painting in the direction of the grain. Let it dry overnight.
When the cabinets have completely dried, use a paint roller to cover large, flat sections and a brush for grooves and crevices. Put in at least two coats and do any required touch-up work. Repeat these steps until you have covered all the bases.
